 |
| Cat 583R Pipelayer |
Summary of Features
|
 |
Cat 3406C DITA diesel engine |
|
245 kW/ 328 HP flywheel power |
|
63,504 kg / 140,000 lb. lift capacity |
|
Planetary power shift transmission |
|
Bolt-on sprocket rim segments |
|
Sealed track |
|
|
|
Transmisión
Three speed planetary auto shift, remotely mounted from engine.
Modular transmission and bevel gear plug into rear of main drive case. Special modulation system permits fast speed and direction changes. |
| Transmission |
Forward Speed |
Reverse Speed |
| Gear |
Km/h - MPH |
Km/h - MPH |
| 1 |
3.5 |
2.3 |
4.7 |
2.9 |
| 2 |
6.4 |
4.0 |
8.1 |
5.0 |
| 3 |
10.8 |
6.8 |
13.8 |
8.6 |
|
|
|
|
|
Torque Divider
- A single stage torque converter with output torque divider
- 70% of engine torque through the converter, 30% through a direct drive shaft
- Torque divider shields the driveline from sudden torque shocks and vibration
Final Drives
- Crown shaved, two-stage planetary, in-line final drive gears
- Splash lubricated and sealed with Du-Cone floating ring seals
- Sprockets have five bolt-on, replaceable rim segments
Steering
Multiple disc clutches and brakes meet SAEJ1026 at APR90
- Hydraulically released, spring applied and separated
- Cooled by pressurized oil
- No adjustment require
- Each assembly serviceable as a unit
- Clutch hand controls
- Two brake foot pedals
- Mechanically actuated, spring applied parking brake
|
Counterweights
| Full hydraulic, single lever control |
| 13 segments, 2@300 kg (662 lb), 6@535
kg (1180 lb) 5@430 kg (948 lb) |
5,960 kg |
13,144 lb |
| Total weight extendable |
9,036 kg |
19,920 lb |
Full hydraulic, single lever control. Horizontal pivot point design provides good side and ground clearance.
Undercarriage
|
Tubular design resists torisional loads.
- Lifetime lubricated rollers and idlers are directly mounted to roller
frame
- Roller frames attach to tractor by pivot shaft and pinned front bar
- Large, lubricated pivot bushings require no maintenance
- Recoil system fully sealed and lubricated
|
| Number of track rollers (each side) |
9 |
|
| Track guage |
2,337 mm |
92" |
| Number of track shoes, each side |
47 |
|
| Length of track on ground |
3,587 mm |
141" |
| Ground contact area with 710 mm (28") shoes |
5.10 sq m |
7,896 sq in |
Hydraulic Controls
Three section gear pump
Pump output at 2,100 pump rpm (2,100 engine rpm) and maximum pressure 490 L/min (129 gpm) |
| Relief valve setting |
| Counterweight |
17,225 kPa |
2,500 psi |
| Hook and boom winch |
18,259 kPa |
2,650 psi |
Caterpillar Engine
Four-stroke cycle, 3406C turbocharged and aftercooled diesel engine.
| Ratings at 2100 RPM |
kW |
HP |
| Gross power |
245 |
328 |
| Net power |
228 |
305 |
| The following ratings apply at 2100 RPM when tested under the specific standard conditions for the specified standard: |
| Net power |
kW |
HP |
| Caterpillar |
228 |
305 |
| ISO 9249 |
228 |
305 |
| EEC 80/1269 |
228 |
305 |
| SAE J1349 |
226 |
302 |
| DIN 70020 |
|
317 PS |
| Dimensions |
|
|
| Bore |
137 mm |
5.4 in |
| Stroke |
165 mm |
6.5 in |
| Displacement |
14.6 litres |
893 cubic in |
|
* Power rating conditions
- Based on standard air conditions of 25C (77F) and 99 kPa(29.32 in ) Hg dry barometer
- Used 35 degree API gravity fuel having an LHV of 42,780 kJ/kg (18,390 Btu/lb) when used at 30C(86F) [ref. a fuel density of 838.9 g/L (7.001 lb/galUS)]
- Net power advertised is the power available at the flywheel when the engine is equipped with fan, air cleaner, muffler, and alternator
- No derating required up to 2286 m (7500 ft) altitude
Features
- Direct injection fuel system with individual adjustment-free unit injectors
- Cam ground and tapered, aluminum alloy pistons with three keystone designed rings, each cooled by oil spray
- Steel backed, copper bonded, aluminum bearings, through hardened crankshaft journals
- Pressure lubricated with full-flow filtered and cooled oil
- Dry-type air cleaner with primary and secondary elements
- 24-volt direct-electric starting system, 50-amp alternator
- Engine/torque divider module is isolation mounted to the mainframe reducing machine vibration and structure radiated noise
- Water cooled turbocharger bearing for longer life
|
Dimensions
|
 |
| A) Width to outside of track |
3048 mm (10'0") |
| B1) Minimum shipping width (counterweight frame, counterweight mounting brackets, boom and boom mounting brackets removed) |
3464 mm (11'4") |
| B2) Shipping width (boom and counterweight removed) |
3644 mm (11'11") |
| C) SAE ground clearance (face of shoe) |
537 mm (21.1") |
| D) Boom height at SAE 4 ft overhang |
6900 mm (22'7") |
| E) Height to top of retracted counterweight |
3410 mm (11'2") |
| F) Grouser height |
78 mm (3.1") |
| G) Operating length |
5486 mm (18') |
| H) Shipping height (boom removed) |
3513 mm (11'6") |
Service refill capacities
Service refill capacities
|
Liters |
U.S. Gallons |
| Fuel tank |
416 |
110 |
| Cooling system |
92 |
24.3 |
| Hydraulic tank |
114 |
30 |
| Transmission, bevel gear & steering clutch (includes torque converter or oil clutch) |
190 |
50 |
| Final drives (each) |
13 |
3.4 |
| Crankcase and filter |
32.5 |
8.6 |
| Recoil spring compartments (each side) |
73 |
19 |
Lifting capacities
 |
Lifting Capacity 6.10 m / 20' boom
Specified Equipment
- Six part load line
- 19 mm / .75" dia. wire rope 26,672 kg / 58,800 lb minimum breaking strength
- 5 part boom line
- 9,036 kg / 19,920 lb of counterweights extended
- Total operating weight 44,748 kg / 98,650 lb
A Max lift capacity per SAEJ743 MAR92
B Rated load capacity per ANSI/ASME B30.14
C Working range per ANSI/ASME B30.14 |
Weights
Weights
|
Kg |
Lbs |
| Operating |
44,748 |
98,650 |
| Includes all shipping weights plus full fuel tank and operator |
|
|
| Shipping (includes lubricants, coolant, 10% fuel, hydraulic controls and fluids, backup alarm, seat belt, 710 mm (28") single grouser shoes, drawbar and counterweight) |
44,347 kg |
97,767 LB |
Pipelaying equipment
Live power: Continuous power to pipelayer winches, independent of torque converter.
Hydraulic Power: 490 L/min at 18 259 kPa / 183 bar (129 GPM at 2650 PSI) and 2100 rpm pump speed independent of torque converter. |
|
|
Hook |
Boom |
| Drum Diameter |
343 mm |
13.5 in |
343 mm |
13.5 in |
| Flange diameter |
571 mm |
22.5 in |
571 mm |
22.5 in |
| Drum length |
303 mm |
11.9 in |
303 mm |
11.9 in |
| Capacity with 19 mm/ .75" load cable |
126 m |
414 ft |
126 m |
414 ft |
| Hook speed (raise) |
6-part load line |
|
|
Low |
High |
|
| 6-part line |
7.5 m/min (24 ft/min) |
22 m/min (73 ft/min) |
|
|